-
Problems with batch plot using AS2016.
I am having problems with batch plot using AS2016. I talked to support today and they recommended downloading the R2 patch from Autodesk's maintenance page. I tried but the R2 patch status is listed as revoked. everything else on my page has a status as live.I have a very large project that was due today and I needed to hand in shop drawing. This is a serous problem. Please help. -
WT connection help needed
I need to make a columns to beam connetion using WT material. I thought a connection was developed in the connection vault a couple years back for this WT material? is there any way to do some type of automatic connection useing this material without loosing the intelligence box?
-
How do I replace Graitec info with my company name on drawing sheets?
How do I replace Graitec info with my company name on drawing sheets? -
Suggestion with stair rail micro - take dimensions from nose of tread
Suggestion with stair rail micro.
When determing the stair rail height it would be helpful to be able to take dimensions from nose of tread instead or including stair stringer. I would like this to be added to the wish list for consideration. -
Problem with grab rail micro.
Problem with grab rail micro.
When making a grab rail end the bent option works fine with extending the length in relation to post or end length. But when switching to loop option you cannot extend the loop past the post. Is there something I am missing? I have attached the railing file.Attachment: STAIR.zip
-
Issue with an *.upd file in the Document manager
I have a model I am working on and went to go to document manager and received an error.
stair/shop drawing/model/stair/detail/13.upd corrupted file.
Then the computer asked me to acknowledge this error:
ASTEXTDocrequired.error:/currentjobs/bulkresources/stair/shopdrawing/model/stair/detail/13.upd corrupted file.
Then the computer starts checking created doc and has been on that for over an hour. -
Drawing a stair
When I draw a stair into my model I draw in a starting and ending point line. Then through the stair connection tool I pick the bottom end and then the top end of my line. The software creates a stair. On my latest stair I had the stair started at a +2" elevation but the software started the stair at a 0" elevation. The treads were where they were supposed to be but the software added 2" to the bottom of the stringer to get down to 0" elevation. How can I correct this? -
How can I add 3/8" bolts to drop down lists?
How can I add 3/8" bolts to drop down lists? -
AS 2013 ribbon problem
ok Thank you thats what I have at this point. -
AS 2013 ribbon problem
thank you.
Can you give me a screen shot of what AS2013 with autocad is supposed to look like so I know if all the tabs are accounted for? Thanks in advance.