-
Drawing Style Manager - clipping properties
The field "How much should be kept on each side of the clipping area" is grey when the option Automatic clipping is active for the specific drawing style. When deactivate the automatic clipping, the option became active. The value itself shown in this field is stored in the "Clipping strategy" definition. You can modify it when the field is active.See the attached pictureAttachment: Automatic_Clipping.zip
-
Drawing Style Manager - clipping properties
I asked the Autodesk team about this option and I will come back with their answer.
-
Problem with the base plate joint according to LRFD
Seems to be a problem in the software and the development team will take care further
-
Problem with the base plate joint according to LRFD
For investigation,please send us the model and your checking
-
trecerea din advance steel in autocad a sectiunilor vederilor etc
Dupa realizarea modelului in Autodesk Advance Steel, utilizati stiluri de detaliere pentru obtinerea planselor. Plansele rezultate pot fi explodate din Document Manager, folosind optiunea "Add to explode". Fisierele explodate pot fi deschise cu AutoCAD-ul
-
Labels parallel to the element
The labels automatically created are oriented according with the settings from Drawing Style Manager -> Labeling strategy. The labels manually created can be oriented one by one using the specific rotation point
Attachment: Labels place.zip
-
Too many abbrevations
Some of the Abbreviations used in a detail style can be found at page 89 from Drawing Style Manager’s guide
-
Where can I find the camera comand?
In Autodesk Advance Steel 2015, the “Create camera” command is in Tool Palette, in the “Tools” category. See the attached picture.
Attachment: create camera.zip
-
Plate main part numbers not showing
By default, in GA drawings are displayed only the assembly positions. If the plate is an attached part and you want to display the single part position, then you should configure the detail style. In “Detail style manager”, in View category, choose the detail style you want to use. For example, on the “Object presentation” table, in the “Labeling” column choose the “PosBig S30 Guid G” label for the “AttPl” object family.
-
Joint design of "base plate joint"
Please install Service Pack 2 for Autodesk Advance Steel 2014 and verify again this connection