-
Welds in 2D Drawings
If I understand your question properly, just enter 0.0625 for the weld size and it will give you a symbol with no weld size.
-
Modelling rails
Is there a way to model rails on concrete stairs and ramps and still retain the intelligence of the rail modeling? -
Cantilever beam over pipe column
I also use this connection very often in light structures and it is not available to me in 2014. Please advise if it will be included in SP2 for 2014.
-
Add Old Structural Shapes (S15x35) to Advance Steel
I need to add the section property information for a historic shape to the Advance Steel Database. Which file is that information contained in?
-
Joint Code Check
It is after hours for Tech Support so can anyone help me with the following regarding Joint Check For Design?
1. How can I change the default design code from LRFD to ASD?
2. How can I change the check to automatic?
3. The project requires connections for 65% allowable uniform load. How can I change the default from 50% to 65%?
Thank you.
-
Disappearing intelligent connection boxes
Occasionally, and unexpectedly, I have experienced total disappearance of the intelligent connection boxes. On the model which it occurred today, Tech Support discovered the mdb and ldb files were missing and further search did not find them on the hard drive. If you have any experience like this please let me know. I am running AS 2011 with AutoCAD 2012. Thank you. -
Guardrails for Concrete Stairs
If you have developed a good procedure for modeling guardrails for concrete stairs I would appreciate you sharing it with me.
Best regards,
Clint Strain
-
Label Text on E-Sheets, Anchor Bolt Layout, etc.
Is there a way to change the label text font after a drawing has been created? Often I need to reduce the font width for clarity on congestested sheets and simply want to change the font frolm Arial to Arial Narrow. -
Single part details on Assembly Drawing
Thanks Val. When I follow your suggestion I do get the single parts on the Assembly sheet, but I don't get the single parts on a gather sheet as well. My customer would like to have it both places. -
Single part details on Assembly Drawing
I have a customer that wants the single part details on the assembly drawing for use in final QC of the assembly. However, they still want the single parts to be on gather sheets as well. Is this possible, if so, what is the configuration to make it happen?