-
Can you import drawing styles from AS13 or earlier versions to AS16?
-
I got to the conclusion that the user setting and the advance setting of the drawings style is not the same in AS2016. My fix to this problem is: I exported the drawings from the advance setting and then imported it into the user setting. It seems to work for now.
-
Tommy. Your attachment shows the weld preparation on the beam and not on the continuity plate. I have no issues with the weld preparation on the beams only on the plates.
-
Tommy. I did not have it installed until yesterday. I am checking it right now if it it is working. Can you check if it work when you create your plate weld preparation with the moment connection?
-
Tommy. Thanks for the response. I have the weld preparation in that drawing style. When I detail the small part plate the section view shows the angle of the weld preparation but does not show the visible cut. I believe the issue is deeper in the AS2016. I tried many drawing styles and none of the shows the plate weld preparation neither on the small part drawings or the assembly drawings. The beam weld preparations show on both. Is there anybody out there who can see the plate weld preparation with their AS2016 drawing style?
-
I installed AS2016. When I created my shop drawings I realized the plate weld preparation does not show neither on the shall parts nor on the assembly. Anyone had the same or similar issues with AS 2016?
-
After making some changes on a finished model I renumbered the model.
At numbering I used the option single part mark=assembly part mark.
The software gave a new assembly part mark for many members to fill gaps in but kept the old sigle part mark.
I renumbered them again but it did not fix the problem.
What is your suggession to do?
-
Can you create DWG files with advance steel that can be viewed with AUTOCAD without advance steel. If not What kind of object enabler autocad needs to view advance steel dwg files.